Value Hunters Vape devices shortlist: Budget
Vape devices advice for Liverpool, covering strength guide, what to look for and where the trade-offs actually sit.
There is no single best vape devices for everyone in Liverpool, and anyone telling you otherwise is selling something. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Search results for vape devices in Liverpool are crowded, which is why this page focuses on what actually changes the experience. Charging over Micro-USB takes about 56 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Charging over Micro-USB takes about 56 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 0.6 Ω mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 3000 mAh cell holds a usable charge for most of a day at 60 and recharges over Micro-USB.
Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. The wide bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Two things to check before ordering: the Micro-USB socket on the base and whether the 0.6 Ω mesh coil is the newer generation.
We would pair the RELX Pro with a 30:70 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Comparing this against a 30:70 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 3.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. We would pair the RELX Pro with a 30:70 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Pricing in Liverpool shifts with import duty, so the figures here reflect current GBP rates rather than a fixed list price. Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Battery behaviour is where the RELX Pro earns its keep: the 3000 mAh cell holds a usable charge for most of a day at 60 and recharges over Micro-USB.
Delivery across Liverpool is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The build quality on RELX Pro is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 30:70 PG/VG liquid sitting in the chamber.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | RELX Pro |
|---|---|
| Brand family | Wismec |
| Battery capacity | 3000 mAh |
| Power range | 60 W |
| Liquid capacity | 3.0 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 30 ml |
| Liquid ratio | 30:70 PG/VG |
| Nicotine strength | 12 mg/ml |
| Material | polycarbonate |
| Charge port | Micro-USB |
| Connector | 510-X |
| Airflow | fixed |
| Mouthpiece | wide bore |
Flavour and performance notes
A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 30:70 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.