Budget Vape devices picks under 20 in Liverpool (800 mAh)
Vape devices advice for Liverpool, covering flavour notes, what to look for and where the trade-offs actually sit.
Most Liverpool buyers start with a well-known brand name and then discover that fit and coil availability matter far more. Expect roughly 960 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
The gap between a mid-range and a premium vape devices narrows once you know which components you actually use. Flavour tracking stays consistent from the first day to roughly the 1.5 Ω regular mark before the profile flattens and a swap makes sense.
The build quality on RELX Pro is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Type-C fast charge takes about 78 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Pricing in Liverpool shifts with import duty, so the figures here reflect current GBP rates rather than a fixed list price. Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 25, and pushing beyond that adds heat rather than anything worth carrying.
The throat hit is noticeably firmer than a 60:40 PG/VG blend, so if you prefer a smoother draw, mix accordingly. The included spare coils are useful for the first fortnight, after which you will be ordering your own. Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.
Comparing this against a 60:40 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 960 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.5 Ω regular mark before the profile flattens and a swap makes sense.
Replacement coils are widely available, and the 1.5 Ω regular coil is the sensible default to keep in stock. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. What surprised us most was how little the 1.5 Ω regular coil changes the draw character compared with the 60:40 PG/VG liquid sitting in the chamber.
Specifications
The specification sheet is where the real trade-offs show.
| Reference model | RELX Pro |
|---|---|
| Brand family | Beipu |
| Battery capacity | 4000 mAh |
| Power range | 25 W |
| Liquid capacity | 2.0 ml |
| Coil | 1.5 Ω regular |
| Bottle size | 50 ml |
| Liquid ratio | 60:40 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | polycarbonate |
| Charge port | Type-C fast charge |
| Connector | Q-Plus |
| Airflow | mesh window |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Grape Frost Breeze: sweet, fruity, described as dark grape with a cool, brisk finish. On a 60:40 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.5 Ω regular mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.5 Ω regular and the Type-C fast charge are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.