Vape devices side-by-side test for diy mixers (Hcigar Akso)
Vape devices advice for Liverpool, covering side-by-side test, what to look for and where the trade-offs actually sit.
Finding the right vape devices in Liverpool is easier than most catalogues make it sound. Charging over USB-C takes about 60 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Most Liverpool buyers start with a well-known brand name and then discover that fit and coil availability matter far more. Replacement coils are widely available, and the 0.2 Ω dual mesh coil is the sensible default to keep in stock.
Charging over USB-C takes about 60 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the USB-C socket on the base and whether the 0.2 Ω dual mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 800 mAh cell holds a usable charge for most of a day at 120 and recharges over USB-C.
The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 681 full puffs from a charge at 3 mg/ml, based on average session length in our testing. Delivery across Liverpool is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
Comparing this against a 80:20 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. Vapour production is more than adequate at 120, and pushing beyond that adds heat rather than anything worth carrying. Expect roughly 681 full puffs from a charge at 3 mg/ml, based on average session length in our testing.
For diy mixers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 80:20 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
In Liverpool, availability of the 0.2 Ω dual mesh coil is the practical bottleneck, not the device itself. The silicone tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 80:20 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below. The Champagne Gold finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Specifications
The specification sheet is where the real trade-offs show.
| Reference model | RELX Pro |
|---|---|
| Brand family | Lost Vape |
| Battery capacity | 800 mAh |
| Power range | 120 W |
| Liquid capacity | 2.0 ml |
| Coil | 0.2 Ω dual mesh |
| Bottle size | 50 ml |
| Liquid ratio | 80:20 PG/VG |
| Nicotine strength | 3 mg/ml |
| Material | anodised aluminium |
| Charge port | USB-C |
| Connector | 510 bottom pin |
| Airflow | adjustable sliding |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Lemon Lime Soda: citrusy, crisp, described as zesty lemon over lime with gentle carbonation. On a 80:20 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.2 Ω dual mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 0.2 Ω dual mesh and the USB-C are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.